This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

This thesis report describes the development of concepts regarding how weight can be reduced to the analytical instrument Biacore 4000. This thesis has resulted in five different concept proposals, all of which is solutions to reduce the instrument's weight.The thesis started with a pre-study where the instrument's structure and function were studied using both Solid Works, the opportunity to study the instrument in real life were also possible done. During this phase, a weight study was conducted as well, in which the instrument's weight distribution was studied and mapped.Following the initial phase, the work proceeded by developing concrete concepts to reduce the weight of the instrument where focus mainly was on the two cabinets. In addition, another two concepts were revealed, both with a more general approach.At the final phase of the thesis, the concepts were compiled and evaluated among themselves and the initial instrument.The thesis resulted in a study of the instrument's structure and weight distribution, with suggestions on how weight may be reduced for the instrument.The result factors such as materials, and manufacturing were aspects that were taken into consideration.At the final section of the report, suggestions for further work in which different aspects are discussed can be found..

The purpose of the study was to examine what methods and strategies individuals use to maintain their weight loss. Another aim was to explore which factors can complicate or simplify weight loss maintenance. Fifty-four individuals who had maintained their weight loss more than a year, participated by answering a questionnaire. The questionnaire was constructed and distributed through the internet. The answers were registered in the program google docs.  The participants mentioned successful methods and strategies, such as exercising regularly, the majority exercised 30 minutes at least five times per week.

AimThe purpose of this degree thesis was to find out what strategies and behaviours earlier overweight individuals have used to maintain their weight loss.- What strategies did the participants use to loose weight?- Which behaviours are related with maintained weight loss?MethodThe study is based on an encase research with earlier overweight individuals who had lost weight with help of the Cambridge method. The chosen population who further more had maintained their weight for over one year have answered questions about their successfully maintained weight loss.ResultsThe results are based on 32 overweighed individuals, 9 men and 23 women, who had maintained their weight loss for over one year. After the initial weigh loss by help of the Cambridge method their main strategy was to change eating behaviour ? by eating on regular schedule, choose food with less fat ? and to increase their physical activity.

This degree project is an investigation of solar cells and their ability to deliver electric power as well as reducing the need for cooling. The main object of interest is a BASE-X shelter. The shelter is purchased by the Swedish Defence Materiel Administration, FMV to be used for command and camp in the new force called Nordic Battlegroup, NBG. The demand on the equipment is firstly that it should have a small weight to be easy to transport and handle and secondly to be easy to bring up fast. Therefore the choice of solar cell technology fell on thin film cells.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

Bachelor thesis, Trolley Innovation Project, has been unique in the sense that it has been carried out over the borders of Sweden. Iacobucci S.p.A, located outside of Rome in Italy is one of the largest manufacturers of interior equipment for aircraft in the world. With approximately 30% of the market Iacobucci S.p.A is one of the world's largest manufacturers of catering trolleys.The aim has been to produce a new competitive catering trolley for the airline industry. With customers and users in focus, the project team found that weight, ease of use, ergonomics and design were important aspects. Having a low weight of all the interior is particularly important when there is lots of money for the airlines to save in reduced fuel costs.

The environmental issues have during the last decenniums gained an increased role in both the political arena and in the market economy. The society is therefore more knowledgeable about the environment and our impact on it. Through this enlightened state, stakeholders tend to put pressure on the organizations of today. They, more or less willingly, incorporate this responsibility to be a part of their business. Entrepreneurs in the environmental area have seen this rising market as an opportunity to gain market shares and other positive outcomes.

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

Physical rehabilitation is a constantly growing field in veterinary nursing. To build a physical rehabilitation center for dogs you need personnel with adequate education and knowledge. In spite of good knowledge it can be hard to know which areas and equipment necessary for the work. It is of interest to describe how a physical rehabilitation center can be planned and which spaces and equipment to prioritize. In this study, data of different spaces and equipment for a physical rehabilitation center for dogs are presented and also the economical perspective is introduced as a background.

The purpose with this paper is to examine whether other peoples opinions of a song and an artist influences an individuals own opinions of the song and artist. Through a quantitative study we seek to study whether such an influence exists and if it does, how strong that influence is. The study began with a pretest to examine whether differences existed when we manipulated our independent variable, how many times the song has been played at Myspace.com. Subsequently we performed a quantitative study by handing out surveys to students at Stockholm School of Economics on two different occasions. Our results show no significant differences in attitude or intentions when the amount of times the song has been played at Myspace.com is manipulated.

Newspaper articles and media have shown that the use of illegal weight loss compounds, such as ephedrine and Melanotan, is becoming more common among adolescent girls, who are at risk of becoming a new group of addicts. These girls are rarely aware of the risks that the use of these compounds entails and the consequences that could adversely affect their bodies, mentally and physically. The aim of this paper was to investigate the use of and attitudes towards illegal weight loss compounds amongst girls in year three, at Swedish upper secondary schools. In order to do that, a questionnaire was sent out to 120 girls in five different high schools, with varying college preparatory and vocational program directions. My research shows that the use of illegal weight loss compounds, particularly ephedrine, was found among girls in year three, at upper secondary schools. Seven percent of the girls claimed they use, primarily, ephedrine. This result exceeds earlier studies findings on boys' use of anabolic androgenic steroids (AAS).